How do I configure Securly filtering on iPads?

We would like to configure iPads to be filtered by Securly for on-site and/or off-site.

Prerequisite: Regardless of which deployment method you choose, all iPads must have the Securly CA installed for SSL inspection to work properly. It is important to know that filtering will still occur even without the certificate deployed, but users will receive certificate warnings in their browser for HTTPS sites that Securly provide SSL inspection (, for example).

The certificate is included as an attachment at the end of this KB. The preferred method for deployment is with your Mobile Device Management (MDM) software. Please see below for our MDM KB links.

If you do not have an MDM, the steps to manually install the certificate can be found here:


PAC file URL Notes with Apple iOS version.  If the URL does not match correctly, there may be problems with Apps or web browsing.

iOS Version Security PAC file URL
10.1.1 and older Unsecure Only  HTTP://
10.2.0 exactly Secure Only HTTPS://
10.2.1 and new Unsecure or Secure HTTP:// or HTTPS://






Preferred Methods

On-site Only Solution: If you are successfully using Securly DNS filtering already, all iPads should be covered by that implementation. If you do NOT use the Securly DNS filtering solution and would only like to filter your iPads on-site, please submit a request to and jump over to our Best Practices Guide for further assistance.

On-site and Off-Site Solutions: A PAC file created by your Sales Engineer is a hard requirement for any off-site iPads. Please reach out to your Sales Engineer by submitting an email to to have this created for you.

Once you have the PAC file ready for you, please follow one of our below MDM Platform KB articles to complete your setup: 

Off-Site Only Solution: Inline filters and appliances can conflict with an off-site iPad filtering solution. It is best to have a discussion with an engineer to come up with a design plan that works best for you.

Manual Method

Off-site Filtering Note: It is not recommended to allow iPads to go home without an MDM.

Please follow the above "Prerequisites" section to install the Securly CA certificate. Once that is completed, you will need to configure the iPad to use the PAC file. PAC files will be provided by your Sales Engineer before or during the deployment. If you have not been provided with a PAC file, please reach out to your Sales Engineer by submitting an email to to have one created.

Navigate to: Settings > Wi-Fi > (i) next to the Network Name > HTTP Proxy > Auto > URL

Example: ""



Was this article helpful?
7 out of 30 found this helpful
Have more questions?
Submit a request



Article is closed for comments.

Articles in this section

See more